Fleet Essentials
The Malta Desk
Global Supply
The Logbook
Request a Quote
RACLAN Product Line

RAMBSS: Raclan Maritime Battery Safety System

A modular lithium battery storage and charging system for superyachts. Confirm the current approval pack and vessel installation requirements with flag and class.

Key Facts

5.2 kWh
Maximum total stored battery energy per module (LR26434348SF, Condition 2)
3 Sizes
Modules 500, 750 and 1500
LR Type Approval
LR26434348SF, valid to 11 September 2031
Alarm interface
Vessel alarm system integration

Product Overview

The three RAMBSS module sizes side by side - Module 500, Module 750 and Module 1500 - each with a front status touchscreen, ventilation grille and stainless latch, shown together for comparison. Confirm current dimensions and mounting details.
RAMBSS module sizes shown together. Confirm the selected model’s current dimensions and installation conditions.

RAMBSS is a lithium-ion battery storage and charging cabinet system for yacht equipment. Its approval and functions apply to the specified configuration. Confirm the supplied module and battery inventory against the current documents.

The manufacturer describes a composite enclosure with monitoring, alarm, cooling and fire-response features. Confirm the exact equipment, response sequence and backup-power duration for the selected model and installation.

Lloyd's Register Verification

  • RAMBSS has Lloyd’s Register Certificate of Fire Approval LR26434348SF, with a maximum total stored battery energy of 5.2 kWh. Approval conditions apply to the configuration, battery chemistry and installation. Confirm the selected model and vessel arrangement against the complete documents.
  • 2026 Certificate of Fire Approval: LR26434348SF; request the full terms and conditions

Mercer Yachting is the exclusive RACLAN distributor for Malta, Sicily and Greece. Mercer is part of Ritz Marine.

Buy at Ritz Marine: RAMBSS-1 (Module 500), RAMBSS-2 (Module 750), RAMBSS-3 (Module 1500).

Module Sizes

Three module sizes are offered. Confirm the exact battery, charger, internal dimensions and approved configuration before selecting a module.

Module 1 (500)

RAMBSS Module 500 with its door open through 180 degrees, showing the empty white interior cavity, the base plate and the door seal.
Module 500, door open - the usable internal cavity.
External Dimensions
502 x 602 x 700 mm (H x W x L); inside 280 x 520 x 520 mm
Maximum Capacity
5.2 kWh total stored battery energy
Weight
About 85 kg
Suitable For
Check the exact battery and charger

Functions to confirm for this module

  • Confirm the approved cooling and suppression arrangement.
  • Confirm the model’s detection and response conditions.
  • Confirm alarm outputs and their installation requirements.
  • Confirm the specified filter and ventilation arrangement.
  • Confirm cooling and surrounding ventilation requirements.
  • Confirm compatible chargers and the approved electrical arrangement.
  • Confirm local monitoring and any configured remote connection.
  • Confirm backup-power duration and conditions in the selected model’s current documents.

Module 2 (750)

RAMBSS Module 750 with the door open about 90 degrees, showing the internal cavity, grey base plate and the heavy hinge and seal hardware on the door face.
Module 750, door open - note the hinge and seal detail.
External Dimensions
752 x 602 x 700 mm (H x W x L); inside 532 x 520 x 520 mm
Maximum Capacity
5.2 kWh total stored battery energy
Weight
About 100 kg
Suitable For
Check total energy, individual batteries and space

Functions to confirm for this module

  • Confirm the approved cooling and suppression arrangement.
  • Confirm the model’s detection and response conditions.
  • Confirm alarm outputs and their installation requirements.
  • Confirm the specified filter and ventilation arrangement.
  • Confirm cooling and surrounding ventilation requirements.
  • Confirm compatible chargers and the approved electrical arrangement.
  • Confirm local monitoring and any configured remote connection.
  • Confirm backup-power duration and conditions in the selected model’s current documents.

Module 3 (1500)

RAMBSS Module 1500 illustration
Module 1500 shown with its door open. Check the exact device dimensions and approved configuration.
External Dimensions
1520 x 602 x 700 mm (H x W x L); inside 1300 x 520 x 520 mm
Maximum Capacity
5.2 kWh total stored battery energy
Weight
About 174 kg
Suitable For
Confirm the exact device and battery arrangement

Functions to confirm for this module

  • Confirm the approved cooling and suppression arrangement.
  • Confirm the model’s detection and response conditions.
  • Confirm alarm outputs and their installation requirements.
  • Confirm the specified filter and ventilation arrangement.
  • Confirm cooling and surrounding ventilation requirements.
  • Confirm compatible chargers and the approved electrical arrangement.
  • Confirm local monitoring and any configured remote connection.
  • Confirm backup-power duration and conditions in the selected model’s current documents.

Key Features

Cooling and Fire Suppression

The reviewed approval describes automatic cooling and fire suppression in the assessed cabinet configuration. Follow its conditions and the current operating instructions.

Blast & Overpressure Relief

Pressure-relief features are part of the manufacturer-described system. Check their design and installation conditions in the selected model documents.

Gas Treatment and Ventilation

The assessed RAMBSS configuration includes gas-treatment features. Residual gases and surrounding ventilation remain part of the installation assessment. Do not transfer another box’s test results to RAMBSS.

Emergency Backup Power

Confirm backup-power duration and conditions in the selected model’s current documents.

Monitoring Options

The manufacturer describes local monitoring and remote connection options. Confirm the selected configuration, network coverage and alarm arrangements.

Vessel Alarm Interface

The assessed configuration has capability for vessel alarm integration. Confirm the interface, connections and acceptance for the installation.

Internal Charging Sockets

Internal charging sockets are part of the described system. Confirm compatible chargers, operating conditions and supervision in the current instructions.

Custom Finishes

Ask which manufacturer-approved configuration and finishes are available for the selected model. Confirm any design change against the applicable approval conditions.

Stackable & Linkable

Confirm any stacking or linking arrangement with the manufacturer. Use the approved configuration and the vessel’s installation assessment.

Toy Inventory for Your Enquiry

Confirm each proposed battery and charger against the selected module’s current documents. A listed toy brand does not establish compatibility for every model.

Fliteboard Audi e-tron Aerofoils Liftfoils Awake Seabob Lampuga Radinn Jetsurf Other devices only after model-specific assessment

Certification & Compliance

Review the manufacturer’s current test and approval documents for the chosen module and vessel. A certificate for a component or design does not approve an entire yacht installation.

Manufacturer-described system features

LiVault’s September 2026 announcement describes RAMBSS features including closed-door charging, monitoring, cooling, pressure relief and alarm integration. Confirm the approved configuration and capacity in the full Lloyd’s Register certificate schedule and terms. Request the complete certificate schedule and terms before specifying a model.

RISE test evidence

LiVault describes a RISE thermal-runaway test of an NMC battery module, with detection, cooling and pressure-relief responses. Request the full test report and conditions before applying the result to a selected RAMBSS model or vessel installation. The test description does not establish a capacity limit for every module.

Lloyd’s Register Certificate of Fire Approval

RAMBSS has Lloyd’s Register Certificate of Fire Approval LR26434348SF, with a maximum total stored battery energy of 5.2 kWh. Approval conditions apply to the configuration, battery chemistry and installation. Confirm the selected model and vessel arrangement against the complete documents.

Test Scope

The RAMBSS approval references specified explosion testing. Check the exact test and approval documents; separate RACLAN Box certificates do not approve RAMBSS.

MGN 681 (M) Amendment 1

Assess the selected module and complete installation against applicable requirements. Manufacturer alignment claims do not replace the certificate conditions or vessel assessment.

Configuration Review

1

Identify the Exact Equipment

Record the battery model, chemistry, energy, condition and charger before selecting a cabinet.

2

Check the Approved Electrical Arrangement

Have the manufacturer and vessel team confirm the compatible charger, electrical supply, isolation and installation.

3

Confirm Model Monitoring Functions

Confirm the selected model’s monitoring functions and alarm connections in its current operating manual. Do not assume a specific gas-detection capability.

4

Active Fanned Cooling

Active fanned cooling is a manufacturer-described feature. It does not establish that every battery fault or thermal-runaway event will be prevented.

5

Thermal Runaway Response

The manufacturer describes an alarm, charging interruption, cooling and filtration response. Confirm the exact sequence and operating limits in the current manual. Follow the vessel’s procedures for any alarm or thermal event.

Gas-treatment and temperature results are specific to the tested configuration. Request the applicable test evidence and operating instructions for the proposed installation.

Technical Documents

Current RAMBSS data sheets (19 May 2026) and the front page of Lloyd’s Register Type Approval LR26434348SF. The full certificate with its conditions is available on request. The FIPRO certificate covers component material only. Confirm its applicability to the supplied cabinet.

Request a RAMBSS Quote

Send your vessel, battery inventory, available space and delivery port for a product enquiry. Confirm the exact configuration with the manufacturer. Agree delivery, installation and commissioning responsibilities in the quotation.

Frequently Asked Questions

What is RAMBSS?

RAMBSS stands for Raclan Maritime Battery Safety System. It is a modular lithium battery storage and charging system for yachts. Select the cabinet against the battery's chemistry, energy, size and charger, and confirm the vessel installation with flag and class.

Which approval documents cover RAMBSS?

RAMBSS has Lloyd’s Register Certificate of Fire Approval LR26434348SF, with a maximum total stored battery energy of 5.2 kWh. Approval conditions apply to the configuration, battery chemistry and installation. Confirm the selected model and vessel arrangement against the complete documents.

What batteries fit inside RAMBSS modules?

Check chemistry, energy, dimensions and charger compatibility against the selected module’s approval conditions and current manufacturer instructions.

How does RAMBSS connect to the vessel's alarm system?

The assessed configuration supports vessel alarm integration. Confirm the selected model, electrical interface and alarm routing with the manufacturer and vessel team. Remote monitoring depends on the configured connection.

Does RAMBSS comply with MGN 681?

MGN 681 section 5.1 sets a UK Nominated Body approval route for new containers aboard UK-registered vessels from January 2027. Existing onboard containers may remain. LiVault has confirmed this route for RAMBSS. Confirm the applicable certificate conditions and complete installation with flag and class.

Can RAMBSS modules be customised to fit our toy store?

Send the available space and battery inventory for a configuration review. Confirm dimensions, finishes and any proposed modification with the manufacturer and approval documents.