Toys & Watersports Engine Room Deck & Rigging Superyacht Tenders Lithium Safety

The Malta Desk

Operational Agency Yacht Agent Malta Berth & Marina Coordination Customs, Immigration & Crew Change Provisioning & Logistics Concierge & Lifestyle Flag & Compliance Flag Registration Yacht Administration Yacht Charter Operations Crew Documentation Import, Export & VAT

Global Supply

OEM Sourcing Freight & Logistics Active Expediting Sourcing Scope

The Logbook

Guides Dispatches Case Studies

Get a Quote

SEARAFT

Searaft Jet Ski Dock

Name: Searaft Jet Ski Dock
Brand: Searaft
Availability: InStock

Purpose-engineered inflatable dock for superyacht jet-ski operations

The Searaft Jet Ski Dock is a purpose-built inflatable PWC platform engineered specifically to dock, secure, and re-board jet-skis alongside a superyacht without ever touching the hull. Available in three shapes — the single-PWC JT520T T-shape, the square-cutout double JM600T, and the flagship rounded-cutout double JM1400T — each variant is shaped around the geometry of modern and classic PWC hulls so the craft self-centres, stays locked, and re-launches cleanly. Built from 20 cm Double Wall Fabric with a full teak deck surface and airtight boat fabric sides, it is engineered by Airgroup Industries BV in Nijmegen, the Netherlands — known across the superyacht industry as the Dutch Floating Engineers.

For crews, the Jet Ski Dock replaces the daily compromise of roping a PWC off the transom or leaning it on an improvised bumper. Guests re-board from a stable teak deck instead of a slippery transom step, water-ballast bags hold the dock steady in chop, and the modular architecture lets the unit connect directly to Searaft Platforms, SeaPools, and Air Step Transom Bumpers to build an entire on-water venue. 100% made in Europe, REACh-compliant, and designed for charter-grade daily use.

Request a Quote View All Inflatable Platforms

Searaft Jet Ski Dock — Key Facts

Shape variants: 3 (JT520T T-shape, JM600T square M-shape, JM1400T rounded M-shape)
PWC capacity: 1 (JT520T) or 2 jet-skis (JM600T / JM1400T)
Thickness: 20 cm Double Wall Fabric
Origin: 100% Made in Europe (Nijmegen, NL)
Cut-out geometry: Rounded (modern hulls) or square (classic hulls)
Deployment: Approx. 5 minutes with 12 V high-volume pump
Stability: Integrated water-ballast bag system
Modular: Connects to Searaft Platforms, SeaPool, Air Step Transom Bumper

Technical Specifications

Construction, surface, and performance data for the Searaft Jet Ski Dock range

Deck Surface

Teak, Anti-Skid

Thickness

20 cm

Construction

Double Wall + Boat Fabric

Surface Area

5.2 / 6 / 14 m²

Valve

60 mm Non-Return + Relief

Compliance

REACh, EU-Made

Hull-Safe PWC Docking

Purpose-shaped cut-outs cradle the PWC hull so it self-centres and stays locked without leaning against the yacht or transom. A rubbing protective strake runs around the full perimeter and the teak deck absorbs contact instead of telegraphing it to the gelcoat.

Effortless Re-Boarding

Guests step straight from the water onto a broad, flat teak deck instead of clambering up a slippery PWC. Soft grip handles, d-rings, and optional ladder connection points keep the dismount safe even after a long ride, which is exactly what charter and owner programmes need.

Modular Floating Venue

The Jet Ski Dock connects directly to Searaft Platforms, the SeaPool, and the Air Step Transom Bumper to form a single floating on-water venue. Crews can expand from a standalone PWC dock to a full swim-deck and pool configuration as guest numbers grow.

How It Compares

The three Searaft Jet Ski Dock variants side-by-side

Spec	JT520T	JM600T	JM1400T
Shape	T-shape (single jet-ski)	M-shape, square cut-out (double)	M-shape, rounded cut-out (double)
Size	4.0 m × 2.9 m	4.0 m × 3.0 m	5.2 m × 4.0 m
Surface area	5.20 m²	6 m²	14 m²
Top beam	0.9 m wide	1.0 m wide	1.3 m wide
Cut-out	— (single-PWC T-shape)	Square 2.0 × 1.3 m (classic hulls)	Round 2.7 × 1.3 m (modern hulls)
RRP	€4,495	€4,995	€9,950

Prices ex works from Searaft 2025 Retail Price List. Freight, VAT, and commissioning quoted per destination.

How to Specify Your Searaft Jet Ski Dock

Include these details when requesting a quote:

PWC make, model & LOA: Sea-Doo, Yamaha, or Kawasaki model and overall length so we size the correct cut-out

Number of jet-skis to dock: One (JT520T) or two (JM600T or JM1400T)

Shape preference: T-shape single, square M-shape double, or rounded M-shape double

Surface & accent colour: Light grey or black PVC sides with teak deck

Modular add-ons: Air Step Transom Bumper, ladder, Searaft Platform or SeaPool connection

Delivery port & date: Preferred Med or worldwide port and commissioning timeline

Frequently Asked Questions

Which Searaft Jet Ski Dock shape is right for my PWC fleet?

Use the JT520T T-shape for a single jet-ski programme — it is the lightest, smallest-footprint unit in the range at 4.0 m × 2.9 m and 5.20 m². For two PWCs, the JM600T has square cut-outs (2.0 × 1.3 m) that suit older, classic-hulled jet-skis, while the flagship JM1400T uses rounded cut-outs (2.7 × 1.3 m) designed around modern Sea-Doo, Yamaha, and Kawasaki hull shapes. Most modern superyacht PWC fleets specify the JM1400T for its 14 m² deck and rounded geometry.

How does the dock prevent hull contact with the yacht?

The PWC sits inside a purpose-shaped cut-out rather than being tied off against the transom, so the jet-ski hull rests on the dock's internal walls instead of the yacht's gelcoat. A rubbing protective strake runs around the full perimeter, d-rings anchor the dock to the yacht via soft lines, and the Air Step Transom Bumper (sold separately) can be added between the dock and the hull for total separation.

How secure are the jet-skis in rough seas or heavy wash?

The integrated water-ballast bag system fills to hold the dock planted on the waterline instead of bouncing, and the 20 cm Double Wall Fabric construction gives high torsional rigidity. Each PWC locks into its cut-out by geometry rather than by straps alone. In sustained rough conditions we always recommend recovering the jet-skis to deck and deflating the dock — it is engineered for operational swell, not extended storm exposure.

How long does the Searaft Jet Ski Dock take to inflate and deploy?

Approximately five minutes from bag to water with a 12 V high-volume electric pump. The grey 60 mm non-return valve feeds fast, the pressure relief valve protects the Double Wall Fabric from over-inflation, and two crew can carry, position, and anchor the dock alongside the yacht comfortably. Deflation and stowage back into the storage bag takes a similar window. [VERIFY exact inflation time with Searaft for the specific variant and pump used.]

Does the Jet Ski Dock connect to other Searaft platforms?

Yes. Every Searaft product is built to interconnect. The Jet Ski Dock ships with two connection straps and d-rings for the Air Step Transom Bumper, can be linked directly to the Searaft Platform range, and pairs with the Searaft SeaPool and eFoil Dock to build a full floating-venue configuration. The JT520T also includes two multifunctional connection plugs for an optional boarding ladder.

What is the maximum PWC weight the dock can carry?

Searaft does not publish a single maximum PWC weight figure in the 2025 brochure — the dock is engineered around the dimensional envelope of standard Sea-Doo, Yamaha, and Kawasaki recreational PWCs, which typically weigh 300–400 kg fuelled. For heavy supercharged or three-seat performance hulls at the upper end of this bracket, contact Mercer Yachting and we will confirm suitability directly with Airgroup Industries. [VERIFY max PWC kg capacity per variant.]

What warranty comes with the Searaft Jet Ski Dock?

Every unit ships with full Airgroup Industries manufacturer warranty against construction and fabric defects under normal yachting use. Mercer Yachting handles all warranty claims through sister-brand Ritz Marine Limited — the exclusive Searaft dealer in Malta — so any issue is triaged locally first and escalated to the Nijmegen factory only when required. [VERIFY warranty term length with current Searaft terms.]

Do you deliver to Mediterranean ports outside Malta?

Yes. Mercer Yachting ships the Searaft Jet Ski Dock to every major Mediterranean yachting hub — Antibes, Palma de Mallorca, Monaco, Genoa, Athens, and Split — and worldwide by air or sea freight to any nominated port or agent. Mediterranean delivery is typically 7–14 business days from order depending on destination and commissioning requirements. Rush options are available for pre-season and charter-week emergencies.

Similar Products

Searaft Platform

Modular inflatable swim platform for the superyacht transom

Searaft SeaPool

Inflatable sea-pool enclosure for safe open-water swimming

Searaft eFoil Dock

Purpose-built launch and recovery dock for eFoil boards

All Inflatable Platforms

Browse our full inflatable platform and dock collection

Delivery & Commissioning

We deliver to Malta and key Mediterranean ports including Antibes, Palma de Mallorca, Barcelona, Genoa, Athens, and Split. Worldwide delivery available by air and sea freight to any nominated port, agent, or alongside where permitted. Every Searaft Jet Ski Dock arrives with the carry/storage bag, service kit, two connection straps, d-rings, soft grip handles, water-ballast bags, rubbing strake, 60 mm non-return valve, and full Airgroup Industries documentation — commissioned via sister-brand Ritz Marine Limited, the exclusive Searaft dealer in Malta.